Go to address 192.168.1.1 in your browser to access OpenWrt configuration:
To scan for wifi signals and join the signal to repeat: OpenWrt menu -> Network -> Wifi -> on "Wireless Overview" clic "Scan" button.
A list of available networks will appear, then clic "Join Network" button on the right of the selected network.
"Join Network: Settings" screen will appear, then intro the wifi password of the network to join in "WPA passphrase" then clic "submit" button.
Clic "Save & Apply".
... Wait for the changes to be applied.
On the Wireless Overview screen clic the "Add" button to create a wifi network where all your devices will connect.
On the Wireless Network: Master "wifi_name" (radio0.network2) scroll down to Interface Configuration and enter the data of your new network:
Under General Setup tab:
ESSID: "wifi name"
Mode: Access Point
Network: tick "lan"
Under Wireless Security tab:
Choose Encryption: WPA2-PSK
Key: "your_wifi_password"
Clic "Save & Apply" button
------
To put a static route to access the router in the OpenWrt main menu select "Network" -> "Interfaces"
On network "LAN" clic "Edit" button
Put IPv4 Address: 192.168.0.1
Clic "Save & Apply" button
Press the restart button of your router.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment